Charging The Battery - PNI R45 PRO Manual Del Usuario

Current channel number
88
CTCSS (38)/DCS (104) code/tone display
188
C
CTCSS indicator
D DCS indicator
Transmission power level (TX).
The priority channel is displayed on the screen. The priority
PRI
channel can be set in the menu.
The VOX function is active.
VOX
The channel displayed on the screen is memorized.
M
Saved channels scanning mode is active.
GS
The BCL (Busy Channel Lockout) function is active.
BCL
Scanning function is active.
SC
Keys are locked.
Battery level indicator.
Instructions for use

Charging the battery

The battery can be charged in two ways:
1. Connect the USB C cable directly to the radio's USB C port.
2. Place the radio in the desktop charger. Plug the USB C cable into the
USB C port of the desktop charger.
Connect the USB cable to the 230V - 5V adapter. Insert the adapter
into an outlet.
Note: Do not use both charging methods simultaneously.
While charging the battery, the LED indicator on the radio will be red.
When the battery is fully charged, the LED indicator turns green.
User manual 6