KNOTT ETS Plus Instrucciones De Uso página 4

These LED indicators and buttons are available:
LED
Battery status No ETS Plus signal received
LED
ETS Plus status
Brake application
Button
Bluetooth connection ETS Plus connection
Button On / Off
Description of the buttons:
Button Description
Switches the remote indicator on or off.
Switch on: Press the button for half a second.
All of the status LEDs light up briefly and the device is ready for use.
Switch off: Press the button for half a second.
Press the button for half a second to initiate the Bluetooth connection
with a smartphone.
You then have 60 seconds to establish the Bluetooth connection via the
smartphone. The address of the smartphone is then stored permanently.
Connect the ETS Plus with the remote indicator.
Make sure that the ETS Plus is live.
Press the button for half a second to establish the connection.
The orange LED stops blinking.
The device's unique number is immediately recognised
and stored permanently.
6
Version 2/2019
LED
LED
Button
Download
the KNOTT
app now
Instructions for use ETS Plus remote indicator – english
What the illuminated symbols mean:
Symbol LED colour Description
Red Lights up – when the batteries need to be charged so that the
device can function properly.
Orange Blinks – when the remote indicator receives an unconnected or
no ETS Plus signal, or when the ETS Plus signal is too weak.
In these cases, check whether the ETS Plus is switched on and if the
status LED on the drawbar is illuminated. If yes, connect the ETS
Plus via the 'ETS Plus connection' button (for details of how to do
this, see the 'Description of the buttons' table).
*
Note: If the remote indicator is not receiving an ETS Plus signal,
the ETS Plus may also be in sleep mode. The ETS Plus goes into
sleep mode in order to save the battery when the vehicle is parked
for a longer period of time. As soon as the journey is resumed,
the movement of the vehicle ends the sleep mode.
Green / red Lights up green – when the ETS Plus is working properly.
Lights up red – when an exceptional state is detected or an error
has occurred in the ETS Plus. Please take a look at the display of
the status LED on the drawbar. You can also determine the cause
with reference to the ETS Plus manual.
Red Blinks red – when ETS Plus applies the brakes. An acoustic signal
sounds at the same time.
Additional information:
Power supply Rechargeable batteries or 5 V via a micro-USB connector under the
black protective cap on the rear of the remote indicator
Batteries Three rechargeable NiMH AAA batteries 550 – 900 mAh.
Only use rechargeable batteries.
Charging the batteries If the unit is connected to a power supply via USB and the
batteries are installed, these will be charged automatically.
It is recommended that the batteries not be charged for longer
than 24 hours, in order to conserve them.
* Apple and the Apple logo are trademarks of Apple Inc., which are registered in the USA and other countries.
App Store is a service mark of Apple Inc. – Google Play and the Google Play logo are trademarks of Google LLC.
7