Introduction; Features; Application; Playback - Phonic JUBI 12A LITE Manual De Usuario

INTRODUCTION

Congratulations on your purchase of the Phonic Jubi 12A
Lite or Jubi 15A Lite active loudspeakers. The Jubi's 320
Watt (continuous) amplifier uses both Class D and AB
technology to produce up to a shattering 123 dB maximum
SPL. This provides sufficient power for a wide range of
venues, large and small. Jubi's stylish polymer enclosure
also improves acoustical accuracy by minimizing distortion
and diffraction. Finally, reliability and durability was the
paramount factor throughout the Jubi's development.
With 320 Watts of ground shaking power, a 2-channel on-
board mixer, custom engineered transducers, and great
versatility, the Jubi active loudspeakers simply excel.

FEATURES

● Remarkable sound, remarkable power, and remarkable
style in a lightweight, durable enclosure
● 320 Watts of continuous power using Class D technology
● 123 dB maximum sound pressure level
● 12" or 15" woofer matched with 1" compression tweeter
● Flat frequency response between 53/56Hz and 20kHz
● 2 channel onboard mixer: mic channel featuring an
XLR input and 1/4" TRS phone jack, plus a line channel
with 1/4" TRS phone jack and stereo RCA inputs
● Record audio directly to USB flash drives
● Digital MP3 audio playback from USB flash drives
● Send speaker's main signal off to additional speakers
or amplifiers through a balanced XLR output connector
● 4th order phase-accurate Linkwitz-Riley crossover
● 35mm pole mount for extended audience reach
● Impact resistant polymer enclosure with internal
bracings
● Tour grade steel grille (1.2 mm)
● Rotary EQ controls for high and low frequency audio

APPLICATION

35mm mounting point
JUBI 12A LITE / JUBI 15A LITE

PLAYBACK

The USB player supports WAV, WMA and MP3 playback.
1. Insert an appropriately formatted (FAT32) USB flash
drive.
2. On the main menu, select "Playback" and press the
PLAY button.
3. Press the PLAY button to play the current track, or
the << and >> buttons to skip forward and backwards
between tracks.
4. Press the MENU button while in the Playback mode
to access the File Browser, Delete File, Repeat Mode
and Volume Control functions.
5. Press and hold the MENU button for three seconds to
exit playback mode and return to the main menu.
Folders - Freely navigate songs in each folder on USB
flash disc using the << and >> buttons. Press PLAY
button to select, press MENU button to go back.
Repeat Mode - There 4 repeat modes available.
No Repeat - Play each file in the current folder or root
for once.
Repeat one - Constantly repeat selected song.
Repeat Folder - Constantly repeat all the song in the
certain folder or root.
Random – Enables random playback of files in
current folder or root.

RECORD

Users can record high quality WAV format.
1. Insert an appropriately formatted (FAT32) USB flash
drive.
2. In the main menu, select "Record" and press the
PLAY button to enter recording mode.
3. Select between the 128 kbit/s and 192 kbit/s WAV
recording modes and press the PLAY button.
4. Record mode will begin in standby/pause. Push the
Play/Pause button to begin recording. The unit will
save the recorded file into the RECORD directory on
the USB device.
5. Push the Play/Pause button to pause recording.
Pushing the Play/Pause button again will resume
recording from the position at which it was paused.
7. Press the MENU button at any time to save the
recording. Once the recording is saved, the system
will automatically skip to the next track.
8. To exit out of the playback mode and return to the
main menu, press and hold MENU button for three
seconds.
NOTE:
1. The MP3 Recorder rotary control will adjust the
playback level only and will not affect recording levels.
The only level controls that will affect the recording
level are those found on the individual Mic and Line
input channels.
2. Users may experience very short instances of drop
outs during playback of recorded WAV files.
1