Weed Eater 4000C Manual De Instrucciones página 6

HARNESS !
ADJUSTMENT
FOR BALANCE
30 inches
(76 cm)
4-12 (_
6 inches inches
(15 cm) (10 - 30 cm)
below above
waist ground
KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself
with the location of various controls and adjustments. Save this manual for future reference.
Hanger j
Blade
BLADE BLADE SHIELD
The BLADE is designed for cutting grass, The BLADESHIELDprovIdes protection from
weeds, and brush up to 1/2 inch in diameter, the spinning blade.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Edger ........................ 1OO0E
Cultivator ..................... 2OOOT
Blower ....................... 3OOOB
_l_ WARNING:
Always disconnect pow-
erhead spark plug before removing or instal-
ling attachments.
REMOVING BRUSHCUTTER AT-
TACHMENT (OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION: When removing or installing at-
tachments, place the powerhead and attach-
ment on a flat surface for stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Coupler
Lower
Attachment
Upper Shaft
LOOSEN
TIGHTEN Knob
2. Press and hold the locking/release button,
6