Descargar Imprimir esta página

Portfolio 00848 Manual Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

HARDWARE CONTENTS
~ .
~
I~
Bulb
Anchor
c'
>
Screw
Qty. 12
Qty. 1
Qty. 1
A
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
A
the product.
. . WARNING
• For use with low-voltage landscape lighting systems only.
• Risk of electric shock.
• To reduce the risk of fire or injury, turn off/unplug and allow to cool before replacing bulb.
• Install all luminaires 10ft. or more from a pool, spa or fountain.
• Lamp gets hot quickly. Contact only switch/plug when turning on.
• Lighted lamp is HOT Keep lamp away from materials that may burn.
• DO NOT touch hot lens, guard or enclosure.
• DO NOT operate the luminaire fitting with missing or damaged parts.
• This power pack is for use with low-volatage landscape lighting systems ONLY.
• This power pack is suitable for outdoor use ONLY. Do not mount power pack inside
homes, garages, basements or any enclosed structures.
• Do not install or connect wires with wet hands.
• The branch cable is intended for shallow burial- maximum depth must not exceed 6 in. (15.2 em ).
• Do not step on or drive over the branch cable or power cable.
• ONLY plug the power pack cord into a covered 120-volt Class A Type GFCI (ground fault
circuit interrupter) receptacle with a hooded flush type cover plate marked "WET LOCATION."
CAUTION
• Always disconnect the power pack from the electrical outlet when working on the lighting system.
• The device is a certified component of a landscape lighting systems in which the suitability of the
combination shall be determined by UL or other inspection authorities having jurisdiction.
CALCULATING LIGHTING CAPACITY
The power pack has an 88-watt circuit.
To determine the maximum number of fixtures that can be safely connected to this power pack,
add the individual wattages of each fixture. The total wattage of your fixtures must not exceed 88
watts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 90 minutes
Tools required for assembly: Screwdriver, drill bit and drill (not included).
Lowes.com/portfolio
3

Publicidad

loading

Este manual también es adecuado para:

0104292