Connecting Usb Devices - i-tec C31NANODOCKVGAPD Manual De Instrucciones

Quick Start
CONNECTING A VGA MONITOR
The docking station is equipped with 1x VGA Full HD port for the connec-
tion of an external monitor or projector with a VGA interface. For display-
ing your images you can use a plazma or LCD monitors and TVs. Connect
the monitor to the docking station using a VGA cable. During installation
of an additional monitor the screen of the notebook or tablet can flicker
which is a standard condition.
When a VGA and HDMI monitor is connected, the docking station
operates in SST mode (both external monitors will show the same image).
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router/
switch and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.

CONNECTING USB DEVICES

You can use USB 3.0 ports for connecting your keyboard, mouse, external
hard drive, printer and other devices or you can use it for connecting a
USB HUB, which will give you more free USB ports.
CHARGING
The docking station supports charging of USB mobile devices, such as
smart phones, e-book readers, multimedia players, navigation devices,
and tablets. Simply connect the device that you want to charge using the
original cable to the USB port of the docking station. If the device is not
charged, connect the original USB-C power adapter to the USB-C Power
Delivery port of the docking station.
CHARGING THROUGH POWER DELIVERY
The docking station offers USB-C Power Delivery, designed for energizing
of the connected "parent" device using the original or universal power
adapter with the USB-C port.
Important: Disconnecting the USB-C adapter will restart the docking
station and will disconnect and reconnect all connected devices.
| 9
ENGLISH