Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 PLAYSTATION HOW TO
The A50 X works best with the Playstation console when both HDMI and USB connections are used
Configure
1
Place A50 X headset in the Base Station dock and powered on
2
In Setting > Sound > Audio Output:
•
For Output Device, choose HDMI Device (TV) and make sure Switch Output Device Automatically is disabled
•
For HDMI Device Type, choose TV if you have a TV, Stereo speakers, or Stereo soundbar Choose AV Amplifier if you have
a multi-speaker sound system, choose the number of channels that appropriately matches your setup
•
Navigate to the bottom and under Audio Form (Priority), select Linear PCM
3
Optionally: if desired, 3D Audio for TV Speakers can be enabled, but be sure to toggle off/disallow Apply Measurement Results
to 3D Audio
4
Under Microphone, be sure A50 X is selected
Use
1
When the Headset is docked/powered off, Audio from the PlayStation will pass through the A50 X Base Station to the TV/Speaker
2
When the headset is undocked/powered on, Audio from the PlayStation will be auto-routed to the headset
•
If the A50 X headset is undocked, you can power off at any time to resume audio playback to your TV/Speakers
22 ENGLISH
Publicidad
