Magicshine RAY 1600B Manual Del Usuario página 8

EN
OPERATING INSTRUCTIONS
REMOTE CONTROL PAIRING:
*Before using the remote control, please remove the
insulating spacer and reinstall the battery.
Turn on the light, press and hold the "
on the remote for about 10 seconds until the
indicator alternately flashes blue to enter pairing
mode. Then, close the remote to the light until the
indicators on the remote and light unit are constantly
blue for 2 seconds, confirming a successful pairing.
REMOTE CONTROL OPERATION:
ON/OFF: Press and hold the "
second
ADJUST BRIGHTNESS: Click the "
CHANGE MODE: Double click the "
FLASH MODE: Double click the "
FULL OUTPUT MODE (1600LM/2600LM): Click the
□
" " button to go into Full Output Mode and click the
○
□
" "/" " button to return to the previous mode.
*The remote control will enter sleep mode if the light
is turned off for 48 hours without any operation.
Click the light's button to activate it or long-press the
light's button to turn it on, and the remote control
can work normally.
○
""
○
□
"/" " button for 1
○
" button
○
" button
□
" button
□
" buttons