Robern CRAFT Serie Instrucciones De Instalación página 2

TOOLS NEEDED
PARTS
Integrated Single Sink Top
[210-1776]
(2) Mounting Bracket
ASSEMBLY
NOTE: If the integrated top is being mounted to a compatible Robern vanity, use the hardware supplied with the vanity. Otherwise,
proceed to Step 2.
1. Place the top face down on a clean surface. Attach a bracket [210-1776] in both locations using the supplied screws [203-1533].
2. Install the faucet and drain to the sink top (Note: drain must include overflow feature). Refer to the faucet and drain
manufacturer's instructions. Do not overtighten the fixtures, or cracking may occur.
1
© 2021 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Cloth
(1) Drain Cover
[216-1220] Hardware Bag
(Included with Bodo & Skaarsgard Vanities)
[203-1532]
(2) 1/4-20 x 2" Screws
OR
Integrated Double Sink Top
[203-1535]
(4) Washers (2) M5 x 13mm Screws
2
(2) Drain Covers
[203-1533]
2
Part no. 209-1414 11/10/2021
Craft Series Integrated Basin
[203-1534]
(2) Wing Nuts