Bestway 41009 Manual Del Usuario página 6

WARNING
Non-compliance with these operating instructions may expose you to serious danger.
• ATTENTION! NO PROTECTION AGAINST DROWNING!
• SWIMMERS ONLY!
• POOL USE ONLY!
• Evenly distribute loads when use the product. Tipping and drowning may occur with uneven distribution of loads.
TECHNICAL SAFETY INSTRUCTIONS
Read the manual and follow the instructions relating to safety tips, correct and complete product assembly, use and
maintenance.
For your own safety, always follow the advice and warnings in these instructions.
Only use the product in the places and conditions for which it is intended.
• Full inflate all air chambers.
• Passenger number and load weight should not exceed passenger number and maximum weight capacity in the
specifications.
• This product should not be used as life-saving device.
• Life-saving devices (life jackets and life buoys) must be prepared together and inspected.
• Children must be over the age of 3 and able to balance on their own.
• Keep away from flames and fires.
• Before every use, carefully inspect all product components to ensure everything is in good condition and tightly secured.
Please stop to repair if you find any damage.
• Be careful when landing on the ground. Sharp and rough objects such as rocks, cement, shells, glass, etc. may puncture
the product.
• Don't leave the product in the sun for long periods of time, as high temperatures can increase air pressure and cause
damage.
• Only use in water in which the child is within its depth and under adult supervision.
• Adult assistance may be required to maintain balance.
• Do not stand on the toy.
• Hold onto the toy when using it.
• Do not use the toy if you suspect a puncture or leak.
• Proper inflation and use are critical to ensure safety. Tightly close the safety valve before using. Check seams regularly
for damage.
INFLATION
1. Before using the product, carefully check if there are any leaks or broken parts. Open safety valve and inflate with the air
pump (not include) to design working pressure on the product.
2. Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. If you use other pressure
gauge, the pressure should not be more than the specified pressure on the product or on the instruction. Do not
over-inflate the product. Do not use an air compressor.
NOTE: Under and over-inflation of the product will result in safety hazards. It is better to check the pressure of the
product each time before using.
3. Be sure to close the valves after inflation, press in the safety valves after inflation.
NOTE: Never stand on or rest objects on the product during inflation. Always check product for leaks before use.
DEFLATION
MAINTENANCE AND STORAGE
1. After deflation, use a damp cloth to gently clean all surfaces.
NOTE: Never use solvents or other chemicals that may damage the product.
2. Store in a cool, dry place and out of children's reach.
3. Check the product for damage at the beginning of each season and at regular intervals when in use.
REPAIR
If a chamber is damaged use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
OWNER'S MANUAL
6