Buffalo DC858 Manual De Instrucciones página 5

Cleaning, Care & Maintenance
• Always turn Off the appliance and disconnect from the power supply before cleaning.
• Allow the appliance to cool before cleaning.
• The inner body of the appliance should be wiped down at the end of each day's operation. Additional
cleaning may be required depending on frequency of use.
• Warm soapy water is recommended for cleaning. Cleaning agents may cause damage or leave
harmful residues when used for a prolonged period on stainless steel.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
Troubleshooting
If your BUFFALO Pie Warmer develops a fault, please check the following table before making a service
call.
Fault
Appliance not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Appliance heats up Indicator light is faulty
but indicator light
does not come on
Unit not heating up Incorrect operation
or heats up slowly
and the indicator
light is On
Thermostat failure
Element failure
Technical Specifications
Model Voltage Power
DC858
350W
230V,
50Hz
DC859 650W
DC858-DC859_ML_A5_v2 20200420.indb 5
Probable Cause
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Ensure:
•
•
•
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Dimensions
Current
H x W x D mm
1.52A 435 x 470 x 365
2.85A 435 x 745 x 365
Solution
thermostat has been set correctly
doors are closed
thermostat sensor bulb has not been
removed or damaged
Approx. Heat up
Weight pie Time
capacity (to 90°C)
16kg 30 27 min.
23kg 60 28 min.
UK
Temp.
Range
30 - 90°C
5
2020/4/20 14:27