Publicidad
Idiomas disponibles
Idiomas disponibles
9. To turn off the heater, press
off the main power switch in the back cover and remove
plug from the mains socket.
After remove the insulation paper in the remote controller, you
can control the heater by remote controller. All the buttons are
same as the control buttons on the heater and functions are
same too.
The remote controller use CR2025 battery, if the battery needs
to be replaced, please follow below steps:
1. Open the battery cover at the bottom of the remote control,
press the buckle on the battery cover inward and pull it out,
take out the old battery.
2. Identify the polarity of the battery, and insert the new battery
into the battery slot.
3. Push the battery cover to the bottom of the remote control.
If long time no use, please remove the battery from battery box.
2
3
4
www.britec.es
REMOTE CONTROL
1
6
5
17
on the control panel, switch
1. Standby button
2. Oscillation button
3. Timer button
4. Temperature setting
5. Power Setting
6. LED display brightness
Publicidad
