Hitachi ATW-KNX-01 Manual Del Usuario página 2

PMML0242A rev.0 - 04/2013
4 CoNNECTIoNS
70 mm
A
B
5 TECHNICAL FEATuRES
Enclosure
Dimensions
Weight
Color
Power Supply
External Power Supply
Terminal wiring (for power supply
and low-voltage signals)
KNX port
H-Link port
LED
Push buttons
Configuration
operational temperature
Storage temperature
operational humidity
Isolation voltage
RoHS conformity
Certifications
02
Model: ATW-KNX-01
7E549913
28 mm
70 mm
Must use a NEC Class 2 or Limited Power Source (LPS) and SELV rated power supply.
1 x KNX TP1 (EIB) port opto-isolated. Plug-in terminal block (2 poles). TNV-1
CE conformity to EMC directive (2004/108/EC) and Low-voltage directive (2006/95/EC)
PMML0242A rev.0 - 04/2013
C
D
E
F
H-LINK
Max. 1000m
HITACHI - YUTAKI (*)
ABS (UL 94 HB) de 2,5 mm thick
70 X 70 X 28 mm
29V DC, 6mA (KNX bus)
10-40V DC, 100mA (Recommended: 12V DC, 100 mA)
Plug-in terminal block for power connection (2 poles).
Per terminal: solid wires or stranded wires (twisted or with ferrule)
1 core: 0.5mm2... 2.5mm2
2 cores: 0.5mm2... 1.5mm2
3 cores: not permitted
Plug-in terminal block for H-Link bus connection (2 poles) with no polarity.
1 x KNX programming.
1 x KNX programming.
Configuration from ETS
From 0ºC up to 40ºC
From 0ºC up to 40ºC
25-90% at 50ºC, non condensing
External Power Supply – KNX: 2500V
External Power Supply – H-Link: 1500V
Compliant with RoHS directive (2002/95/CE).
EN 61000-6-2; EN 61000-6-3; EN 60950-1; EN 50491-3;
EN 50090-2-2; EN 50428; EN 60669-1; EN 60669-2-1
A: External power supply connection (1).
2 wire terminal
B: DC Jack
C: KNX Port
KNX TP-1 (Bus EIB)
D: KNX Programming led.
E: KNX Programming button.
F: H-LINK port.
(1) Must use NEC Class 2 or Limited
Power Source (LPS) and SELV rated
power supply.
If using DC power supply:
Respect polarity applied of terminals (+)
and (-). Be sure the voltage applied is
within the range admitted (10 to 40 Vdc).
The power supply can be connected to
earth but only through the negative termi-
nal, never through the positive terminal
N o T E
Connect only one external power su-
pply. Use either the two-wire terminal
connector (A) or the DC adaptor Jack
connector (B).
(*) YUTAKI S example:
Terminal board 2: Terminals 1 and 2.
70g
Ivory White