Descargar Imprimir esta página

UFESA PR Everest Manual De Instrucciones página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
Preheating takes about 3-5 min. After preheating is completed, three beeps will be sound,
the red light (7) is now fixed, and the green light of Ready to use (8) is on, OK button(13)
flashes. Now you can start baking food.
If user does not have any operation after preheating is completed, after 30 minutes three
beeps will be sound and it will automatically enter standby mode.
Prepare the burgers, meat or other foods and place them into the bottom cooking plate.
Close the top cooking plate which has a floating hinge (3) that is designed to evenly press
down the food.
The top plate must be fully lowered to achieve grill marks on the selected foods. For thin
food move it to Low position, for thicker food move it to High position.
For each program you can select the cooking level (Rare-Medium-Well Done) by pressing
+/- buttons (5-6), then press ok button (13) to start cooking with your preferences. After 3
beeps, a countdown will start in Time display (4).
Each cooking level has a preset time which is shown in the Time display (4).
In the below table you can check all parameters of time and temperature:
Food Type
Steak
Chicken
Fish
Sandwich
Hamburguer
When the frying is completed, the machine beeps 3 times, the product stops heating, power
button (12) and power light (7) will flash, and all other lights are off (turn to standby).
WORKING IN MANUAL MODE
Press the TEMP button (1), the temperature display (3) will display the temperature of the
baking pan and flash. The temperature can be adjusted as per your preferences by pres-
sing the +/- buttons (5-6).
After 5 seconds, it will automatically enter the program of the selected temperature, and
the temperature value is always on and does not flash. If you need to adjust the tempera-
ture again, you need to press the TEMP button (1) again and adjust temperature.
Press the TIME button (2), the time display shows the time and flashes. Time can be adjus-
ted by the +/- buttons (5-6).
After 5 seconds, it will automatically enter the selected time program, and the time will
start to enter the countdown mode. If you need to change the set time, you need to press
the TIMER button again.
18
Temperature
230 ºC
220 ºC
200 ºC
210 ºC
220 ºC
Rare
Medium
2:30
3:30
3:00
5:00
-
4:30
2:30
3:30
3:00
4:00
Well Done
5:00
7:00
6:00
4:30
5:00

Publicidad

loading