WAC
5
6
8
USER
MAN
f_nal
3/2/05
12:23
PM
Page
8 0
ELECTRICAL SPECIFICATIONS
1. All wiring must comply with local and national
electrical
codes and must be installed
by a
licensed electrician.
Once you have any
questions
regarding
the following
instructions,
contact a licensed
electrician.
2. Check available
power supply and resolve any
wiring problems
BEFORE
installing and operating
this unit.
3. For your safety and protection,
this unit is
grounded
through the power cord
when
plugged
into a matching
wall outlet.
If you are
not sure whether
your wall outlet
is properly
grounded,
please
consult
a licensed
electrician.
If the air conditioner
has a serial
plate rating
of 115 volts and up to and including
7.5 amps
the unit maybe
on a fuse or circuit
breaker
with other devices.
However,
the maximum
amps
of all devices
on that fuse or circuit
breaker
can not exceed
the amps
of the fuse
of circuit
breaker.
If the air conditioner
has a serial
plate rating
of 115 volts and greater
than 7.5 amps
it
must
have its own fuse or circuit
breaker,
and no other device
or unit should
be
operated
on the fuse or circuit
breaker.
To avoid the possibility
of personal
injury,
disconnect
the
power to the unit before
installing
or servicing.
4. The wall outlet(3-pin)
must match the plug
(3-pin) on the power
cord supplied with the unit.
DO NOT use plug adapters
or extension
cords.
See (Table 1) for receptacle
and fuse information.
5. The rating plate on the unit contains electrical
and other technical
data. The rating plate is located
on the right side of the unit.
COOLING
CAPACITY
5K,
6K.
8K
RATED VOLTS
125
AMPS
15
WALL OUTLET
FUSE SIZE
15
Time Delay Fuse
Plug type
(or circuit breaker)
Table 1
Note:
5K including
6K including
8K including
AAW-05CR1FHU
AAW-05CM1FHU
AAW-06CR1FHU
AAW-06CM1FHU
AAW-08CR1FHU
AAW-08DR1FHU
AAW-08CM 1FHU
AAW-08DM 1FHU