Publicidad
3.5
List of notes
Will show all the notes on programs that appear in you Electronic Programmes
Guide
(EPG) menu or that you have added manually.
4. System setup
4.1
Setting the TV
From the Settings Menu, shown in Picture 14, the TV system, the video out and the
aspect proportion of the TV. Press " up" or " down" to select the points. To change the
settings, press the " left" and " right" function keys to al ternate between the different
settings, or press ENTER and then the " up" a nd " down" function keys
of
options. The possible options are:
TV system: NTSC, PAL, Automatic. See Picture 15.
TV type: 4:3 Panoramic, 4:3 Letterbox, 16:9. See Picture 16.
Picture 14: TV settings menu
Picture 16: TV type
4.2
Setting the video
From the Video Settings Menu, shown in Picture 18, the brightness, contrast, hue and
can be changed. Press the " up" or " down" function keys to select one of the
points. To change the settings, press the " lef t" and " right" functi on keys to alternate
between the different settings. Alternativel
y, you can also press ENTER to choose
from
a list of possible settings.
Picture 18: Video Settings Menu
Settings:
Brightness: 0-12
Contrast: 0-12
Hue: -6 - +6
12
to select a list
Picture 15: TV system
3.2 Radio Channels
The Radio Channels Menu, shown in Figure 11, is similar to the TV Channels Menu.
The channels appear listed on the left. The ch
" down" function keys, and the groups can be changed using the " left" or " right"
and
function keys. Press DISPLAY to classify channels.
Picture 11: Radio Channels Menu
3.3 Type of Channels
From the Type of Channels Menu, shown in Picture 12, each channel can be classified
into a group. Pressing ENTER will add the seri es channels to the column category. Use
the TV / RADIO function key to alternate between TV channels and radio channels.
Note: Should there be no channels, the user will not be able to enter this menu.
Picture 12: Type of Channels Menu
3.4
Channel edit
The channel edit menu is shown in Picture 13. To change the name of a channel select
the channel and press ENTER. Following this, use the left or right function keys to
select a character and " up" or " down" to change a character. Press ENTER to confirm
the name change. To change the position of a channel, select the MOVE column and
press ENTER. Next, use the " up" and " down" function keys to change the number order
of the channel and the ENTER key to conf irm the change. Select the DELETE column
and press ENTER if you wish to erase a chan nel. Use the TV / RADIO key to alternate
between television channels and radio channels. Note: If there are no channels available,
the user the user cannot access channel edit.
Picture 13: Channel edit menu
11
annels can be changed using the " up"
Publicidad
