Descargar Imprimir esta página

Scythe GRAND KAMA CROSS2 Guia De Instalacion página 2

Publicidad

Socket LGA 775 / 1150 / 1155 / 1156 / 1366
intel
775
1155/1156
1155/1156
775のみ!
M/B
M/B
775 only!
1150
1155 / 1156
1366
●ネジの締めすぎに注意してください!
●Please be cautious not to overtighten the screws!
●Soyez attentifs à ne pas trop serrer les vis!
●Achten Sie darauf, die Schrauben nicht zu stark anzuziehen!
●¡Procure no apretar demasiado los tornillos!
●Будьте осторожны, не затягивайте винты слишком сильно!
1366
1150
1150
⑨ ⑪
775
/ 2011
●CPUから大きくはみ出さない程度の量を均一に塗ります。
●Apply the thermal grease evenly.
●Appliquez la graisse thermique de façon égale.
●Verteilen Sie die Wärmeleitpaste gleichmäßig.
●Aplique la grasa termal uniformemente.
●Распределите равномерно термопасту на поверхности процессора.
6
Socket AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+
●CPUから大きくはみ出さない程度の量を均一に塗ります。
●Apply the thermal grease evenly.
●Appliquez la graisse thermique de façon égale.
●Verteilen Sie die Wärmeleitpaste gleichmäßig.
●Aplique la grasa termal uniformemente.
●Распределите равномерно термопасту на
поверхности процессора.
バックプレートのネジ受け部の高さが4mm以上ある
場合、 付属のワッシャーを2枚挟んでください。
Should the height of the screw hole and the back plate
thickness sum up to more than 4 mm, please use double
washers for each position.
4mm↑
Back Plate
●ネジの締めすぎに注意してください!
●Please be cautious not to overtighten the screws!
●Soyez attentifs à ne pas trop serrer les vis!
●Achten Sie darauf, die Schrauben nicht zu stark anzuziehen!
●¡Procure no apretar demasiado los tornillos!
●Будьте осторожны, не затягивайте винты слишком сильно!
※マザーボードへの取り付けは、 純正の
バックプレートを使用してください。
※Please use the back plate of the
motherboard for installation
to AMD.
※4の手順完了時点では金具が若干ぐらつきます
が、 5の手順完了後に固定されます。
※The mounting plate will be slightly loose at step 4,
but will be firmly secured after finishing step 5.
6

Publicidad

loading