Publicidad
Idiomas disponibles
Idiomas disponibles
About the controls on the air conditioner
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE: The display always shows
the room temperature
except when
setting the Set temperature
or the
Delay timer.
SF))d .odo
®
Auto
@ Cool
® On
•
High
•
Energy
® Off
Sever
Air Conditioner
Controls
Unit powe_;_ll
on/off
Hode select_
O
Fan spee_,_lm
O
Delay 1-24t_r,,_
O
Temperatuee_
set/Delay
Timer Increase
and Decrease
r
.Go°
¢'-Fan_'/
. k2pee_
z4_rJ
Temp / Delay
C'w'D
J
Remote Control
Controls
Power Pad
0
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in Cool or Energy
Saver modes.The Set light will turn on while
setting.
O
emp and Delay Increase •/Decrease
•
Pads
Useto set temperature or delay time.
Temperature can be set in Cool and Energy
Saving and mode.
Mode Pad
Useto set the air conditioner to Fan Only or
Coo/, Energy Saver mode.
O
an Speed Pads
In Coo/,Energy Saving mode:
Useto set the fan speed to Auto, High, Med or
Low on the unit.
In Fan Only mode:
Useto set the fan speed to High, Med, or Low
on the unit.
Delay Pad
Delay ON--When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set to automatically turn offin 1 to
24 hours.
How to set:
Pressthe Delay 1-24hr pad on the unit or the
remote control. Eachtouch of the Increase • /
Decrease • pads on the unit or the Increase+
/ Decrease - pads on the remote control will set
the timer in 1-hour intervals.
To review the remaining time on the Delay
1-24hr timer, press the Delay 1-24hr pad on the
unit or the remote control. Use the Increase • /
Decrease • pads on the unit or the Increase +
/ Decrease - pads on the remote control to set
a new time if desired.
To cancel the timer, press Decrease • pad on
the unit or the remote control until the set time
is zero. After :3seconds the light on the Delay
1-24 hour pad goes off.
4
Publicidad
