Descargar Imprimir esta página

Brandt B3228HD LED Manual De Instrucciones página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic Operation
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to go to the following channel.
Press CH- to go to the preceding channel.
• Using 0- 9 numeric buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select a one-digit channel (e.g. Channel 5): Press 5.
To select a two-digit channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume adjustment
• Press the VOL+/- button to adjust the volume.
• If you want to switch the sound OFF, press the
• You can release mute by pressing the
Changing the Input Source
You can select the input source by pressing the SOURCE button on the remote control.
Press the▲/▼button to cycle through the input sources, and press the ENTER button
to confirm your choice.
How to Navigate Menus
Before using the TV follow the steps below to learn how to navigate the menus in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1.
Press the MENU button to display the main menu.
2.
Press the ◄/► button to cycle through the main menu. You can choose between
Picture, Sound, Channel, Lock System and Setup.
3.
Press the ▲/▼ button to highlight the desired sub item.
4.
Press the ENTER button to access the submenu.
5.
Press the ▲/▼/◄/► button to select the desired value. The adjustment in the
OSD may differ depending on the selected menu.
6.
Press the MENU button to return to the previous menu.
7.
Press the EXIT button to exit the menu.
NOTE:
When a menu item is greyed out, it means that the item is not available or cannot be
adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote
control. If you lost your remote control or if it is not working, you may use the buttons
on the TV to select menus. This manual focuses on operation with the remote control.
However, please note the following when navigating via the buttons on the TV control
panel: CH+ can be used to go up, CH- to go down, VOL+ to go right and VOL- to go
left.
Some items in the menus may be hidden depending on modes or signal sources
used.
.
again or by increasing the volume.
15

Publicidad

loading