Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE CONTENTS
•
I~
Anchor
Qty. 2
A
SAFETY INFORMATION
C'
>
Phillips screw
Qty. 2
IEil
E&l
Transformer
mounting template
Qty. 1
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
A
wARNING
• For use with low-voltage landscape lighting systems only.
• Risk of electric shock.
• To reduce the risk of fire or injury, turn off/unplug and allow to cool before replacing bulb.
• Install all luminaires 10ft. or more from a pool, spa or fountain.
• Lamp gets hot quickly. Contact only switch/plug when turning on.
• Lighted lamp is HOT Keep lamp away from materials that may burn.
• DO NOT touch hot lens, guard or enclosure.
• DO NOT operate the luminaire fitting with missing or damaged parts.
• This power pack is for use with low-volatage landscape lighting systems ONLY.
• This power pack is suitable for outdoor use ONLY. Do not mount power pack inside
homes, garages, basements or any enclosed structures.
• Do not install or connect wires with wet hands.
• The branch cable is intended for shallow burial -maximum depth must not exceed 6 in. (15.2 em ).
• Do not step on or drive over the branch cable or power cable.
• ONLY plug the power pack cord into a covered 120-volt Class A Type GFCI (ground fault
circuit interrupter) receptacle with a hooded flush type cover plate marked "WET LOCATION."
CAUTION
• Always disconnect the power pack from the electrical outlet when working on the lighting system.
• The device is a certified component of a landscape lighting system in which the suitability of the
combination shall be determined by UL or other inspection authorities having jurisdiction.
CALCULATING LIGHTING CAPACITY
The 120W power pack has a 120-watt circuit. To determine the maximum number of fixtures that
can be safely connected to this power pack, add up the individual wattages of each fixture. The
total wattage of your fixtures must not exceed 120 watts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 90 minutes
Tools required for assembly: Screwdriver, drill bit and drill (not included).
Lowes.com/portfolio
3
Publicidad
