70mai Midrive UP04 Manual Del Usuario página 8

After the preparations, follow the steps below to
bind the hardwire kit.
1. Park the car in a place where your phone's
Internet signal is good. And then start the car
to turn on the main device.
2. Add the main device in the 70mai app
following the user manual and user guide of
the main device.
3. Open the 70mai app and enter the plug-in
page of the main device, and tap 4G module.
4. Bind the hardwire kit following the
instructions on the screen. The main device's
network service will be available once the
hardwire kit is bound successfully.
Note: During the binding, keep your phone close to
the main device without obstacles inbetween.
Precautions
Before using the device, please read all the
precautions to ensure correct and safe use.
Please ask a professional technician to perform
●
the installation. Our company is not liable for
any short-circuiting of the car power supply and
damage to car battery or interior due to improper
installation.
Our company is not liable for any losses resulting
●
from the installation of the product unless they
are caused by product quality issues.
The performance of this product is affected by
●
the reliability of the car power source, car battery
and main device. Our company is not liable for any
losses from the malfunction of this product unless
it is caused by product quality issues.
06