Descargar Imprimir esta página

LD Systems DIO 22 Manual De Usuario página 20

Ocultar thumbs Ver también para DIO 22:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the unit.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used,
make sure that damage to the unit is prevented (e.g. fans must be blocked in this case).
3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
4. In general, no cleaning agents, disinfectants or agents with an abrasive effect may be used
for maintenance, otherwise the surface finish may be impaired. Especially solvents, such as
alcohol, can impair the function of the housing seals.
5. Units should generally be stored in a dry place and protected from dust and dirt.
MAINTENANCE AND REPAIR (BY QUALIFIED PERSONNEL ONLY)
DANGER! There are live components in the unit. Even after disconnecting from the
mains, residual voltage may still be present in the unit, e.g. due to charged capacitors.
NOTE! There are no assemblies in the unit that require maintenance by the user.
NOTE! Maintenance and repair work may only be carried out by specialist personnel
authorised by the manufacturer. In case of doubt, contact the manufacturer.
NOTE! Improperly performed maintenance work can affect the warranty claim.
DIMENSIONS (mm)
142
20

Publicidad

loading

Este manual también es adecuado para:

Dio 44Lddio22Lddio44