Koenic KGC 1221 B Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
Operation
Open the hinged lid and add the desired
Fig.
1
amount of coffee beans to the grinding
jar, but no more than the MAX mark
indicates. Close the lid.
Connect the power plug to a suitable
Fig.
2
power outlet.
Use the setting buttons for cup
Fig.
3
number and grind level to set the
desired values.
Button
Indicator
Button
Indicator
Hold the motor unit with one hand.
Fig.
4
Press and hold the on/off switch down
to turn on the product.
The product has an Auto-Off function,
once the set value for number of cups
and grind level is reached, the product
will automatically stop. Release the on/
off button. You can also switch off the
device by releasing the on/ off switch.
Repeat the process a few times if
necessary to achieve the desired result.
The product may be switched on for a
maximum of 30 seconds (short-time
operation KB = 30 sec.) And must
be sufficiently cooled down before
restarting (at least 60 sec.).
IM_KGC1221 B_190509_V03_HR.indb 13
Fig.
Fig.
Cleaning and care
Cups (Cups)
12
10
8
6
4
Grind (Grind)
Fine (Fine)
Med. (Medium)
Fig.
Coarse (Coarse)
Fig.
Fig.
• Never use corrosive detergents, wire
• Dry the product thoroughly after cleaning.
• Store the product in a cool, dry location,
When the coffee is ground as desired,
5
unplug the power cord from the outlet.
Lift up the hinged lid and pour the
6
coffee, e.g. in a coffee box. Remaining
coffee can be removed from the
grinding bowl using a brush, after
removing the cover (see chapter
Cleaning and care). Do not use metal
tools or other hard objects to clean
the grinding bowl. Clean the device as
described under Cleaning and care.
Warning
• Before cleaning, always switch off the
product and disconnect the plug from the
power supply.
• Make sure that no moisture is entering
the product during cleaning.
• Never immerse the motor unit in water or
other liquids.
Turn the cover counterclockwise a little to
7
release it and remove it.
Turn the grinding jar counterclockwise
8
a little and also observing the printed
symbols to loosen it. Remove the grinding
jar with grinding bowl.
Clean both components with a brush,
9
blow out or under running water.
Make sure that all parts are dry before
assembly. The assembling is done
in reverse order. Follow the printed
symbols.
brushes, abrasive scourers, metal or sharp
implements to clean your product.
away from children and pets.
English
13
9/5/19 10:10 am

Publicidad

Tabla de contenido
loading

Tabla de contenido