Publicidad
Idiomas disponibles
Idiomas disponibles
Note: the images are for guidance only and
should be used to support the installation.
Your
product
does
assembly, just make sure you read the
operating instructions before plugging it
in.
USING THE APPLIANCE
This device is easy to use and does not
require much knowledge. However, we
advise you to familiarize yourself with the
instructions below.
(
Control panel
see picture 02 on page 5)
17. Cold air button: press this button to
activate the cold air mode. You must
insert the ice blocks.
18. Oscillation button: Press the button to
activate the vertical air outlet flaps,
which distribute the air outlet to the
left and right. Press the button again
to stop the oscillation.
19. Timer button: Press the button to set a
timer for up to 7 hours. Keep pressing
the button continuously to increase
the hours. To see what time you have
selected, see which indicator lights
have come on. To cancel the timer,
simply press the button until the
indicator goes out.
20.
Speed button: The wind speed
can be adjusted in 3 levels (low-
middle-high) by pressing the "Speed"
button. Each time the "Speed" button
is pressed, an indicator lights up to
indicate the speed level.
21. Heat air button: press the button to
operate the appliance in hot air mode
as follows:
• Press the button when the product is
in operation, the indicator light will
turn on in low temperature mode.
• Press the button again to operate the
product in high temperature heat
mode.
22.
OFF button: press the button to
turn off the product.
not
require
any
(
Remote control
see picture 03 on page 7)
The device incorporates a remote control,
for a more comfortable and efficient use.
In order for the remote control to work, it
must always be aimed at the fan.
Before you start using it, please take a few
minutes to familiarize yourself with the
functions:
23.
OFF button: press the button to
turn off the product.
24.
Heat air button: press the button to
operate the appliance in hot air mode
as follows:
• Press the button when the product is
in operation, the indicator light will
turn on in low temperature mode.
• Press the button again to operate the
product in high temperature heat
mode.
25.
Speed button: The wind speed
can be adjusted in 3 levels (low-
middle-high) by pressing the "Speed"
button. Each time the "Speed" button
is pressed, an indicator lights up to
indicate the speed level.
26.
Oscillation button: Press the button
to activate the vertical air outlet flaps,
which distribute the air outlet to the
left and right. Press the button again
to stop the oscillation.
27.
Timer button: Press the button
to set a timer for up to 7 hours. Keep
pressing the button continuously to
increase the hours. To see what time
you have selected, see which indicator
lights have come on. To cancel the
timer, simply press the button until
the indicator goes out.
28.
Cold air button: press this button
to activate the cold air mode. You
must insert the ice blocks.
Please note the following information:
• Do not place the controller near
something with high temperature like
an electric heating bed cushion or a
heating radiator;
• Do not place the controller at places
directly exposed to the sunlight or
EN
25
Publicidad
