Kenmore 116.32720 Manual Del Usuario página 14

TO REPLACE DUST BIN
Turn This Direction Open
To Close For Use (For Emptying)
Closed
(For Use)
Place dust bin lid assembly back onto top of
dust bin., Align lid marks with bin marks as
shown above in Open (For Emptying),.
Rotate lid clockwise while pressing down-
ward so that marks align as shown in
Closed (For Use).
//
Place dust bin /'_
back into vacuum / t_:%'V
cleaner by insert- __ _--_/
ing the bottom first _ _--_\
and tilt back with _
the dust bin han- ""_'-_
die raised, _ ,alll
Manija de
soltar et cubo
de/a basura
Cubo de
la basura
Push forward and
lower the dust bin
handle to lock
dust bin in place,
Check secondary filter frequently and clean
when dirty,,
, WARNiNG
Electrical Shock Hazard
Do not operate the cleaner without
the motor safety filter. Be sure the
filter is properly installed to prevent
motor failure and/or electrical
shock,
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
SECONDARY FILTER
FOAM
Remove the dust bin as outlined in the
DUST BIN CLEANING section,
Remove secondary filter from vacuum
cleaner.
Secondary
Filter--_
!
Wash the secondary filter in warm soapy
water; rinse and dry thoroughly by squeez-
ing the filter in your hand and letting it air
dry
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace dry secondary filter., Ensure filter is
properly installed over filter opening°
Replace the dust bin as outined in the
DUST BIN CLEANING section.
14