Care and cleaning
The thermometer should be cleaned in between uses, as necessary.
Use an alcohol swab or cotton swab moistened with alcohol (70% Isopropyl) to clean
the thermometer casing and the measuring scanner area. Ensure that no liquid enters
the interior of the thermometer.
Never use abrasive cleaning agents, thinners or benzene for cleaning and never soak the
device in water or other cleaning liquids. Wait 10 minutes after cleaning before taking a
temperature measurement.
Make sure to replace the protective cap after use to prevent scratches or damage to
the thermometer.
Never insert a sharp object into the scanner area or any other open surface on the
thermometer.
Clean scanner area before each use or as needed.
Replacing the batteries
The Braun Sensian
Non-contact forehead thermometer comes with 2 AAA batteries.
™
Replace with 2 new AAA batteries when the flashing battery symbol appears on the LCD screen.
To change the batteries, slide open the battery cover and remove batteries. Replace the batteries
being sure to align properly as indicated inside the battery compartment. Remove the batteries
from the device if it will not be used for an extended period of time in order to avoid damage to
the thermometer resulting from a leaking battery.
To protect the environment, dispose of the product and empty batteries at
appropriate collection sites according to national or local regulations.
Do not mix alkaline, standard, or rechargeable batteries.
English
11