1. SAFETY INSTRUCTIONS
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury or damage
to the product in case of non-observance of
the instructions in this manual.
Protect the product against frost.
2. MACHINE INFORMATION
Intended use
This product has been designed to clean various
surfaces like windows, sloping roofs, walls, fascia
boards and solar panels. The telescopic wash
brush is water fed and can be connected to a uni-
versal garden hose coupling. The product can be
extended to a maximum of 6.5m.
SPECIFICATIONS
Model No.
Minimum length
Maximum length
Number of extendable parts
Length of PVC hose
Material tubes
Max. water temperature
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Multi purpose brush head
2. Telescopic pole
3. Water hose with ball valve
4. Connection hose with T-connector
5. Soap dispenser with hose connectors
6. Window cleaning head 2-in-1
WWW.VONROC.COM
TB502XX
1.58 m
6.50 m
4 parts
9 m
Aluminium
40°C
3. ASSEMBLY
Connecting the water hose and brush head
(Fig. A,B,C,D,E)
1. Insert the water hose(3) through the opening at
the bottom of the telescopic pole(2). Extend the
thinnest segment slightly and push the water
hose out through the opening in this segment.
2. Connect the brush head(1) or window cleaning
head(6) hand-tight to the pole(2).
3. Connect the water hose(3) to the T-connec-
tor(4). To disconnect the water hose from the
T-connector, slightly push in the small ring
which will dislodge the water hose.
Connecting the soap dispenser (Fig. F,G)
1. Connect the water hose with ball valve(3) to the
female coupling of the soap dispenser(5).
2. Connect a universal garden hose coupling to the
male coupling of the soap dispenser(5).
3. Open the soap dispenser(5) by unscrewing
the transparent cup. Fill the soap dispenser
with a suitable detergent, then close the soap
dispenser.
4. The detergent dosage can be adjusted with the
knob on top.
4. OPERATION
Ready for use (Fig. H,I)
Risk of injury! Ensure that all components
are undamaged and have been assembled
securely. Incomplete assembly may result in
personal injury.
Keep the product out of the way of children
and other unauthorised persons.
• Extend the telescopic pole to the required
working length. To retract or extend, use the
thinnest part of the pole fi rst, then slide the
thicker part in or out. Be careful when retracting
the telescopic pole, ensure that the water hose
cannot kink inside the pole.
Do not turn the segments! Only slide in and
out straight.
1. When not using the soap dispenser, connect
the ball valve(3) to a universal garden hose
coupling.
EN
5