WATSEA Aquacleaner 80 Manual De Instrucciones página 2

INTERNAL FILTER WATSEA AQUACLEANER 80
Assemble the filter
1. Check if the Filter Cartridge and water pump are assembled properly as in Picture 1 . Make
sure the Cartridge fixing bracket is inserted completely into Casing , Filter Cartridge is
inserted into Cartridge fixing bracket and Hook is installed at the back of the Body. (Hook
position can be adjusted to suite aquarium tank water level)
2. Hang the filter on the proper position of the aquarium tank and use the suction cup to fix the
filter onto the surface of the aquarium tank as show in Picture 2. Make sure that the water
level in the aquarium tank is not lower than the minimum water level of the filter as shown on
picture 2
1