CASUALPLAY VINTAGE 3 Instrucciones De Uso página 16

ADJUSTING THE FOOTREST (illustration 14)
• Pull the tab on the front of the footrest outwards to extend the length.
ADJUSTING THE BACKREST (illustrations 15-16)
• The backrest has 3 reclining positions. Pull the recliner lever upwards (fig.15), and move
the backrest into position by either lowering it or raising it, (fig.16) release the lever when
the backrest is in the required position.
ADJUSTING THE HEADREST (illustration 17)
• The headrest has 3 heights. To change the height, pull the red handle (A) situated on the
backrest and then the headrest (B), until it is locked in one of the three positions.
WARNING: The child must not be sitting in the seat while any adjustment is made
(changing the direction or fitting or removing the seat).
CHANGING THE DIRECTION OF THE SEAT (illustrations 18-21)
• Put the parking brake on.
• Press the buttons on both sides of the seat. A red signal will appear in the window
(fig.18). Then pull the seat upwards (fig.19).
• Install the seat in the required position (fig.20) and make sure that the green signal
appears in the window indicating that it is correctly fastened (fig.21). The child can now
be seated.
LOCKING THE FRONT WHEELS (illustration 22)
• The front wheels can be locked or free. To set them to the free position raise the levers
on both sides of the wheels. To lock them, move these levers downwards. A click will
indicate they are correctly fastened.
FITTING THE HOOD (illustrations 23-24)
• Fit the hood by inserting the guides on both ends into the slots situated on the sides of
the pushchair (fig.23). A click will indicate it is correctly fastened. To take the hood off,
press the catch on the front of the guide upwards and pull forwards (fig.24).
• The hood has two parts. The lower part can be removed using the middle zip.
FITTING THE RAIN COVER (illustration 25)
• The rain cover is fitted onto the pushchair with the hood open.
• Fasten the zip situated on the front part of the hood and the elastic strip with Velcro
situated on the lower front part around the tubes of the chassis.
14