Publicidad
Step 22
1
G
D36
å
Pull the LARGE DRAWER FRONT BRACKETS (9G) apart and slide
them into the grooves in the LARGE DRAWER SIDES (D36 and D37).
You may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH"
for easy identification.
å
Fasten the LARGE LEFT DRAWER FRONT (G) to the LARGE
DRAWER FRONT BRACKETS (9G). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
3
M67
1
Surface with
HIDDEN CAM
å
Push a HIDDEN CAM (1F) into a DRAWER BRACE (M67). Then, insert
the metal end of a CAM DOWEL (2F) into the HIDDEN CAM.
å
Fasten the DRAWER BRACE (M67) to the LARGE LEFT
DRAWER FRONT (G). Tighten one HIDDEN CAM.
Page 26
Push down
9G
D37
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
Arrow
Metal end
1F
2F
Hidden part using
recycled material.
Color may vary.
M67
G
With the palm of your hand,
2
tap the DRAWER BOTTOM
down into the groove.
D36
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide a DRAWER BOTTOM (D974) into the grooves in the
LARGE DRAWER SIDES (D36 and D37) and LARGE LEFT
DRAWER FRONT (G).
4
D36
å
Fasten the LARGE DRAWER BACK (D167) to the LARGE
DRAWER SIDES (D36 and D37) and DRAWER BRACE (M67).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat this
step using the remaining LARGE DRAWER FRONTS (G and H).
430044
U n
D974
fi n
i s h
e d
s u
r f a
c e
G
D37
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
D167
M67
D37
www.sauder.com/service
11
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Publicidad
