I
14. Pick up the Right Door (L) and attach the extended Hinge Arms to the Hinge Bases installed on Right Side
Panel (J). Loosen the bolt on the back of Hinge Base for a comfortable fit. Align and insert the "U" slot on
Hinge Arm under the bolt head on the back of Hinge Base. Make sure that both door hinges engage and
function properly. Tighten the bolt on the Hinge Base to lock the hinges in place.
15. Repeat the same procedure to attach the Left Door (K) to the Left Side Panel (I).
16. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws
for a good fit. Refer to the hinge sticker on door for adjustment.
17. Stick the Rubber Bumpers (10) on the outer corners of Doors (K and L) where they meet the Top Front
Stretcher (D) and the Bottom Panel (C).
Assembly Instructions
J
K
Rubber Bumper
(4 used in this step)
I /J
I /J
1
L
10
⑩
15
K/L
K/L
K/L
10