Publicidad
Idiomas disponibles
Idiomas disponibles
Remote Control Indicator
Remote Control
Indicator
Flashing green fast
Flashing green
slowly
Solid green
NOTE: During normal operation, the remote control indicator will light one time when
the TURBO button or the start/stop button is pressed once.
Recharging the Remote Control
(Fig. 10c)
Periodically the battery inside the remote
control will need to be recharged. Use
only with listed/certified ITE Power Supply.
WARNING:
Li-ion battery inside the remote control,
please be aware of below:
◾
Risk of fire and burns.
◾
Do not open, crush, heat above 140°F (60°C) or incinerate.
◾
Do not short circuit.
◾
If bulges severely, discontinue use.
1 Open the USB-C port cover.
2 Connect the USB-C end of the included charging cable to the USB-C port in the
remote control.
3 Connect the other end of the charging cable to a compatible USB power adapter/
charger (not included). It may take up to 2h to charge a fully discharged battery.
4 When finished charging, disconnect the charging cable and close the USB-C port
cover to protect the USB-C port from contamination.
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
Meaning
The remote control battery
charge is nearly depleted.
The remote control is
charging.
The charging of the remote
control is complete.
For this rechargeable
ACTION
Charge the remote control.
No action needed.
Disconnect the remote
control and charging cable
from power supply.
10c
USB-C Port Cover
USB-C Port
Charging Cable
29
Publicidad
