Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.4 After the installation and before switch on the heater, double check the cable is fixed inside the
hook on the back of the heater. Do not allow cord to come in contact with heated surfaces during
operation.
4. How to operate
ü The distance between the heater and the remote control should be less than 3 metre, and the
remote control must be directly point to the receiver.
ü Connector the heater to a 230-240V 50Hz power outlet.
ü Press the ON/Off Switch to the position of I, the heater starts to heat.
5. Cleaning:
Publicidad
Tabla de contenido
