OPERATING INSTRUCTIONS
1. Set the power pack (I) timer adjustment knob to your
desired setting.
Off: Turns the power pack (I) off
Auto: When the sunlight is more than 10 LUX (morining
light) contacts the photosensor, the power pack (I) will go
into standby mode. When sunlight is less than 10 LUX
(evening light) the photosensor will activate the power pack
( 1).
8H: When sunlight is less than 10 LUX (evening light) the
photosensor will activate the power pack (I) for eight hours.
6H: When sunlight is less than 10 LUX (evening light) the
photosensor will activate the power pack (I) for six hours.
4H: When sunlight is less than 10 LUX (evening light) the
photosensor will activate the power pack (I) for four hours.
2. Place the power pack (I) in an area that is free from
plants or other obstructions that will prevent sunlight
from coming into contact with it. The photosensor should
not be located where street lights, exterior lights or other
light sources may shine directly upon it. The power pack
(I) and photosensor do not operate when the switch is in
the off position.
8
0
Lowes.com/portfolio