device again.
Special attention must be paid to the use of these devices
in places with relatively low humidity conditions.
When using the Smartwatch/Smartband in places with low relative humidity
(dry/poorly ventilated places, low humidity atmospheric conditions, dry
indoors, if heating or air conditioning is always on, etc.), as with any other
electronic device, it may be affected by charges of static electricity on rare
but certain occasions. This may cause damage to the device and also to the
person wearing it at that time. Static electricity is everywhere. It surrounds
us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at home:
• Use a humidifier. Humidity is a good conductor of electricity therefore, by
maintaining an acceptable percentage of it,
we will avoid static in areas of the home where we metal objects may be
found. Small containers of water on top of radiators is another alternative
solution.
The use of the devices in bed, whilst sleeping, is especially discouraged for
children and the elderly due to the fact that repeated movements during the
night may cause, through friction with sheets, blankets, etc. a charge of
static electricity. This may result in a sudden discharge of the watch's
battery and/or heating of same as the human body is a conductive element
and can cause a reaction to people with sensitive skin, redness, irritation,
etc.
If you notice redness, swelling, itching, or any other form of irritation,
remove the Smartwatch immediately and consult your physician before
using the device again in case you are suffering from any type of reaction,
allergic or otherwise.
INNOVA CELLULAR.
Thank you for using our smart band INNOVA.
Important! The data provided by the smart band, such as heart rate,
blood oxygen and blood pressure, are merely indicative, it is not an exact
medical measuring device.
Even if you are well, go to all the appointments scheduled by your doctor.
Before using the device please read this instruction manual in its entirety.
Wearing
Place the bracelet on your wrist, and adjust the strap for a comfortable wear,
ensuring the sensor is in contact with your skin. If the sensor is not in
contact with your skin, the measurements will not be accurate.