Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer
to carry out repair work.
-——
Symptom
No power
Cause
Remedy
© Has the power cord been disconnected?
e Reconnect the power cord.
No sound.
Le:
Sound distortion.
{On the FM band]
Sound distortion.
[On the MW or LW band)
Stereo broadcasts not received
in stereo.
¢ Have any of the connecting cords been
¢ Connect them properly to TUNER terminals on
disconnected or incorrectly connected?
the amplifier.
e Has the antenna been disconnected or is the
© Connect the antenna properly.
connection loose?
© Has the power cord been unplugged for several
days? (Station memory has been lost.)
e Is the input selector on the amplifier set to
TUNER?
Memorize the preset stations once again.
© Select TUNER as the input source on your
amplifier.
;
¢ Substitute an FM outdoor antenna for the FM
T-type antenna.
® Set FM MODE switch to MONO
(reception will
be in monaural).
¢ Try varying the height and direction of the
antenna or use an FM outdoor antenna
substituting a 75 Q coaxial cable for the
standard cable and fixing it as far away as
possible from the street.
© Are the signals weak and reception poor?
© Static from other appliances (particularly
automobiles) or multipath reflection (radio waves
beamed off mountains and tall buildings and not
received directly.)
© Change the direction of the antenna until best
reception is obtained as far as possible from
tuner.
° Static from other electrical appliances (fluorescent|
® Switch off other appliances or keep as far away
lights/motors?)
as possible from the tuner when in use.
¢ Are the signals weak, with insufficient input?
e Change to an outdoor FM antenna.
e is FM MODE switch MONO?
© Press FM MODE switch to AUTO.
¢ Is the AM loop antenna oriented poorly or located
in an unsatisfactory position?
9
<ARE1157>
En
Publicidad
