Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Dismantle the screws, sleeve pipe and stopper on the lower end cover of the two
door bodies, and install them successively on the other side of the door bodies (the
stopper needs to be replaced from the additional bag). Then remove the upper end
cover of the cooler door and switch the wire harness with a sleeve pipe to the other
side of the door body. Finally install the sleeve pipe of the upper hinge on the cooler
door in the hole on the other side of upper end cover of the cooler door.
6.
Put the freezer door on bottom hinge, install the middle hinge, the screws and the
screw hole caps.
8
screw
middle hinge
sleeve pipe
stopper
screw
hole cap
Publicidad
