Publicidad
Idiomas disponibles
Idiomas disponibles
4 Set the AUTO PRESET CH.
NOTES:
. ff "D.S.T (Daylight Saving)" and "TIME ZONE" is not set,
you cannot select "AUTO PRESET
CH".
. Make sure if the TV is connected
to antenna or cable.
When antenna
is connected,
select "AUTO PRESET CH
(TV/DTV)"
at the procedure
below.
When connected
to
CATV, select "AUTO PRESET
CH (CATV)".
Here describes the case for searching and
memorizing
channels for TV/DTV.
,, Using [CH A/T], select "AUTO PRESET
CH(TV/DTV)".
1 PLEASE C ONNECT ANTENNA TO
THE UNIT
2 SETUPTHE ITEMS WITH
AVAND¥BUTTONS
DST (Daylight Saving)
ION]
TIMEZONE
[ALASKA]
• AUTO PRESET CH(TV_DTV)
AUTO PRESET CH(CATV}
,,When you press [VOL A], the channel scanning
in both analog and digital modes will automati-
cally start.
AUTOPRESETCH(TWDTV)
_I_
,,When scanning is completed, the memorized
smallest channel will be displayed.
NOTES:
* The initial AUTO PRESET
CH function can be executed for
either TV/DTV or CATV only once. If you want to scan both
TV/DTV and CATV, you need to select "CHANNEL
SET" in
the MENU screen to scan and memorize
other channels after
initial presetting
is completed.
(Refer to page 28.)
. You can exit the initial AUTO PRESET menu by pressing
[MENU].
. When you press [MENU]
while scanning,
the scanning is
interrupted
and the memorized
smallest channel is dis-
played.
* If you press [POWER],
the power will be turned off. When
the scanning
is not completed,
initial AUTO PRESET CH
screen is displayed every time you turn on the power.
* When no channel can be received by AUTO PRESET
CH,
"NO TV SIGNALS"
is displayed
on the screen.
NO TVSIGNALS
EN
Publicidad
