Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Star Bright Wardrobe, White
L5356
Assembly Difficulty
two-person job
easy - medium -
hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Could we do better?
If there is anything you think could be improved in these instructions or in the
assembly of this product we'd be grateful if you could let us know; we'll pass
any helpful hints and tips on to other customers via our website and update
the instructions.
All you need to do is drop us a line at instructions@gltc.co.uk
V1
Thank you
29/04/2022
1

Publicidad

loading

Resumen de contenidos para Great Little Trading L5356

  • Página 1 Star Bright Wardrobe, White A few important pointers before you start: L5356 • Please read the instructions right through before you start, and check that all the components have been included in the pack;...
  • Página 2 AVERTISSEMENT! WARNING! AFIN D’ÉVITER TOUT RENVERSEMENT, CE PRODUIT DOIT ÊTRE IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE UTILISÉ AVEC LE DISPOSITIF DE FIXATION MURALE FOURNI. Veuillez USED WITH THE WALL ATTACHMENT DEVICE PROVIDED. consulter les informations supplémentaires dans le manuel de montage et Please see further information in the assembly manual and on the back panel.
  • Página 3 WARNUNG! ¡ADVERTENCIA! UM EIN UMKIPPEN ZU VERHINDERN, MUSS DIESES PRODUKT MIT DER PARA EVITAR VUELCOS, ESTE PRODUCTO DEBE UTILIZARSE CON EL MITGELIEFERTEN WANDBEFESTIGUNG VERWENDET WERDEN. Weitere DISPOSITIVO DE FIJACIÓN A LA PARED PROPORCIONADO. Consulte Informationen finden Sie in der Montageanleitung und auf der Rückseite. más información en el manual de montaje y en el panel posterior.
  • Página 4 Component Check List Component Check List 1x Upper LH Side Panel 1x Upper RH Side Panel 1x Lower Back Panel 1x LH Drawer Side 2x Back Rails 1x Top Panel 1x RH Drawer Side 1x Drawer Front 1x Mid Panel 1x LH Lower Side Panel 1x Drawer Back 1x Drawer Base...
  • Página 5 Component Check List Component Check List 24x Cam Dowels 24x Cam Locks 1x RH FlatRunners 1x RH ‘L-Shaped’ Runner 35mmL 14mm Diameter 1x LH ‘L-Shaped’ Runner 2x Rail Mount Plates 16x Wooden Dowels 4x Screws Note: These plates may come connected to 20mmL 25mmL Part #13, please unscrew to separate.
  • Página 6 STEP 2: STEP 1: Prepare the top panel (D) by You will need plenty of space to build this unit as the panels are large. We also FRONT inserting 6x cam dowels (#1). suggest you use a carpeted area to protect the panels during the build. Firstly, decide on the desired height of the hanging rail.
  • Página 7 STEP 4: STEP 5: FRONT Insert 4x wooden dowels (#4) to top panel (D) and connect to side panels A and B Prepare panel E by inserting 6x securing with 6x cam locks (#2). cam dowels (#1) where indicated. Note: Rounded corners and block on top panel D to be uppermost. Note the correct position of this hardware - there are more drill holes here...
  • Página 8 STEP 7: STEP 8: NOTE: The back edge of the panels is the one with the groove along it. Insert 4x wooden dowels (#4) to panel E and connect side panels F and G as shown Attach LH flat runner (#10) to panel F as shown ensuring that the wheel of the ensuring that the wheel of the runners is at the top.
  • Página 9 STEP 9: STEP 10: two-person step Insert 4x wooden dowels (#4) and 6x barrel nuts (#5) to the ends of panels F and IMPORTANT: Two people are needed to complete the next step safely. G. Position base panel H to the ends of panels F and G ensuring that the rounded GBR - Carefully turn the unit over so the back is facing up.
  • Página 10 STEP 11: STEP 12: Place back panels K, J and I onto the ledged recess on the back of the unit ensuring Attach LH L-shaped’ runner (#13) to drawer side panel L as shown with 3x screws that the holes in the panels match the pilot holes in the unit. Secure the panels with (#8).
  • Página 11 STEP 13: STEP 15: Attach RH L-shaped’ runner (#12) to drawer side panel M as shown with 3x screws Create the drawer by attaching side panels (L & M) to the drawer back panel (O) (#8). Ensure that the wheel of the runner is at the end with the 2x pilot holes. using 4x screws (#14).
  • Página 12 STEP 16: STEP 17: Slide the drawer into the wardrobe. Insert the hanging rail. Thread the two collars (#15) onto the rail making sure the threaded ends are facing away from each other and towards each end of the rail itself. Insert one end of the rail into the mounting plate on the side panel and tighten, then position and tighten the remaining end to the remaining mounting plate.
  • Página 13 STEP 18: STEP 19: Fitting the hinges. Attach the 3x hinges (#17) to the back of the LH door R using 6x screws (#7). Attach the 3x hinge base plate (#16) to both of the side panels. There are 3 hinges for Repeat for the RH door S.
  • Página 14 STEP 20: STEP 21: Attaching the doors. Attaching the doors. two-person Ensure that all the hinges are in the open position (as shown) on the RH Door S. Repeat step 20 for the LH door R. step With the assistance of a second person to support the door, start at with the bottom Once all hinges are installed on both doors, you can check the alignment of the door and adjust as required.
  • Página 15 STEP 22: Your unit is now ready to use. Before you use your unit, we strongly advise that you attach the anti-tip kit (included) to the wardrobe to secure this product to the wall. Please use the pilot holes on the back panel (highlighted in step 11) to attach the anti- tip brackets using the hardware included with the kit.
  • Página 18 When correct position is achieved, repeat with the second door. When in the corrected position, re-tighten the screws. Repeat with the second door. Copyright© 2016 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.