Descargar Imprimir esta página

Pur Line CHE-340 Manual De Usuario página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
CONTROL PANEL
The controls are located at the top of the fireplace. It takes some time for the receiver to respond to the
transmitter. Do not PRESS the buttons more than once within two seconds for correct operation.
+
ON/OFF
HEAT
TIMER
INFRARED REMOTE CONTROL
Remote control requires one 3V CR2025 Lithium Cell Battery (included). Remove the protective sheet between
the battery and the contacts in order to operate.
ON/OFF
+
HEAT
-
DAY
SET UP
WEEK/TIME
FLAME: Press this button to adjust the brightness.
HEAT:
- MODE SETTING: Press this button for Low Heat-High Heat-OFF.
- TEMPERATURE SETTING: Press the heat button in heating mode first, then press "+" button to increase
temperature and "-" button to reduce temperature in the range of 15-30 ºC.
-
ON/OFF:
on and you can select the functions as desired. Press this button
again to turn off the device.
TIMER: Press this button and "+"or "-" to set up the time, Day
(Monday-Tuesday-Wednesday-Thursday-Friday-Saturday-
Sunday), Hour and Minute.
-
:
5 is the brightest grade. Setting is 5-4-3-2-1.
+
:
5 settings, 1-2-3-4-5.
FLAME
HEAT:
times for high heat, press again to turn heating off, and fan will
continue working for 10 seconds.
FLAME
HOUR
MINUTE
EN
Press this button once, flame is turn on. The unit is turn
Two settings. Press one time for low heat, press two
ON/OFF:
Press this button once, flame is turn on. The
unit is turn on and you can select the functions as
desired. Press this button again to turn off the device.
DAY: Press the DAY button to set up the real-time
before start WEEK-TIME setting. 1- Press DAY button,
then press "+" or "-" button to change from Monday
to Sunday; 2- Press HOUR button, then press "+" or "-"
button to set time by hour; 3- Press MIN button, then
press "+" or "-" button to set time by minute.
HOUR: Timer setting by hour
MIN: Timer setting by minute
WEEK/TIME: Press this button to start week timing
setting, then press SET UP button to choose mode
ON/OFF, then press "+" or "-" button to select day from
Monday to Sunday; Press HOUR button and "+" or
"-" button to set hour; Press MIN button and "+" or "-"
button to set minutes.
SET UP: This button is for week timing setting mode:
ON/OFF. After press WEEK/TIME button first, press SET
UP button to choose mode ON or OFF.
14

Publicidad

loading