Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting the
lock
Lock function
The lock function ensu-
res that pressing the
various buttons will not
affect the selected pro-
gramme and wash
options. It is used as a
child protection lock,
etc.
Activating the
lock
The lock is activated
by simultaneously
holding down the
Extra Rinse and Easy
Iron buttons for at
least 3 seconds.
After this period, the
on/off light will start to
flash to confirm that the
lock has been enabled
and the washing
machine will start to
function.
The lock should be
activated after selec-
ting the wash program-
me and all its options,
as well as the desired
delay.
Deactivating the
lock
The lock is eliminated
when the wash program-
me ends, when the END
light comes on.
If you wish to deactivate
the lock without reaching
the end of the program-
me, you should hold
down the EXTRA RINSE
and EASY IRON buttons
for at least 3 seconds.
After the 3 seconds, the
light will go off and the
machine will enter the
pause mode. The OFF
function (press the con-
trol in or the button in the
middle in the fully inte-
grated model) does not
eliminate the lock.
When the washing
machine starts to work
again, it will continue to
run the programme at the
point where it left off.
Publicidad
