Echo DTT-2100 Manual De Instrucciones página 25

Servicing guidelines
Area
Battery
Gear housing
Blades
Screws, bolts and nuts
IMPORTANT
Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance. Record
dates of monthly and yearly inspections.
Maintenance and care
If you have any questions or problems, please contact your dealer.
Cleaning battery and battery compartment
1. Battery
2. Battery pack latch
Care for cutting blades
 Wear gloves to protect hands from sharp blades.
 Failure to observe these precautions could lead to injury.
1. Bolt slots
2. Lubrication section
Maintenance
Inspect / Clean / Charge
Grease
Inspect / Clean / Lubricate
Inspect / Tighten / Replace
3. Battery compartment
Maintenance and care
Maintenance and care
Page
15
25
23
-
 Risk of electric shock or fire. Do not use conducting ma-
terials to clean battery or battery compartment.
1. Release trigger switch and trigger switch lockout and allow
cutting device to stop.
2. Make sure power indicator LED is not illuminated.
3. Depress battery pack latch release slide battery pack out of
power head.
4. Use compressed air or a soft bristle brush to remove debris
from battery and battery compartment.
CAUTION
Lubricating blades (Every 4 hours of operation)
Apply a few drops of oil to each of the bolt slots(1) at the bottom
of the blades.
Cleaning blades (After each use)
Remove gummy residue from blades with a 50 : 50 mixture of
kerosene (paraffin) and machine oil.
23
Before use Monthly
•
• (15-20 h)
•
•
WARNING