Alpina LQ003 Manual De Instrucciones página 5

ASSEMBLING
1. Unscrew the white screws placed on the low part of the appliance.
2. Put the cable & plug of the appliance through the hole in the middle
of the support and assemble both together by putting the top part
into the support.
3. Put the white screws through the support into the appliance and
screw them tightly.
4. Lead the cable through the small cut out away on the backside of
the support.
5. To operate easily, stand the appliance on a horizontal, flat and
stable surface. Make sure the safety switch (8) gets in touch with
the floor, otherwise the appliance will not work.
WORKING
1. Make sure all switches are switched off in "OFF"/"O" position.
2. Plug in the appliance and turn on Power OFF/ON switch (1) . The
tube in the middle will turn on. The other tubes can be turned on
with other switches (2 & 3).
3. Turn on the switch (4) for the oscillating function (TURN) to make
the appliance swing to the left and to the right.
4. To switch off the appliance, turn all switches to "OFF"/"O" position
and unplug the appliance.