foxbox Warp Corvus Manual página 6

CorvuS
EN
WIRELESS SPEAKER
ENGLISH
Directions for use:
1. Device to connect
1.1 Turn on WARP CORVUS to default wireless mode.
1.2 Turn on wireless device, search model WARP CORVUS
and connect, play music after connection successfully.
2. Suitable for all kinds of mobile phones equipped
with wireless technology, wireless adapter,
wireless players.
3. Voice prompt
3.1. Voice prompt when turn on/o .
3.2. Low-power voice prompt 3 times, shutdown after 15s.
3.3. voice prompt when the button to the maximum
volume, no voice prompt at the minimum volume.
4. Mode switching
4.1. WARP CORVUS enter into wireless by default when
starting-up,
switching sequence is as follows:
wireless mode - radio mode -SD card mode
-USB mode - AUX mode.
4.2. mode: post-insertion priority.
5. indicator
wireless search status: the blue light ashes quickly,
about 0.5 seconds/time
Wireless pairing status: blue light is always on.
blue light ash slowly about 1.5 seconds a time;
play status: The blue light ashes slowly for about
1.5 seconds/time;
starting-up status: red light slow ash prompt when
the power is less than 30% , about 1.5 seconds a
time; red light is always lighting when it is charging,
the light will turn o when the power is full.
6. volume
the default volume of speaker is 70% when
starting-up.