Tescoma FancyHome Instrucciones De Uso página 4

a Instructions for use
Safety instructions
The fan may only be used for the intended purpose, i.e. for room ventilation.
WARNING!
NEVER USE THE FAN WITHOUT THE PROTECTIVE GRILLES IN PLACE; DO NOT REMOVE THE GRILLES FROM THE FAN
AFTER ASSEMBLY.
NEVER INSERT ANY OBJECTS INTO THE GRILLE OF THE FAN.
DO NOT USE THE FAN IN BATHROOMS.
NEVER TOUCH THE APPLIANCE WITH WET OR DAMP HANDS.
The appliance may be used by children aged 8 years and above and persons with reduced physical, sensory or
mental capabilities or a lack of experience and knowledge only under supervision or after they have been instructed
in the safe use of the appliance and understand the related risks. Children should be supervised to ensure that they
do not play with the appliance. Cleaning and user maintenance may not be performed by unattended children.
Never leave any parts of the packaging within the reach of children.
Never pull the cable or the appliance itself in order to disconnect the plug from the socket. Always remove the plug
from the socket before carrying out any cleaning or servicing operation. For safety reasons, a damaged power cord
must be replaced by an authorised service centre.
In the event of the appliance failing to operate, all repairs must be carried out by a qualifi ed service centre;
for contact details, see www.tescoma.com.
Technical parameters
Voltage: 230 V
Power input: 45 W
Legend
(see the page inserted in the centre of these instructions)
1. Front protective grille / 2. Propeller nut (reverse thread) / 3. Propeller / 4. Nut of the back protective grille
5. Back protective grille / 6. Propeller axis / 7. Speed switch / 8. Oscillation button / 9. Motor cover
10. Tilt adjustment joint / 11. Power cord with plug / 12. Base pole / 13. Base / 14. Nut of the base
15. Arresting screw
Before fi rst use
Unpack all parts of the product and remove any impurities using a dry or damp cloth.
Assembly
(see the page inserted in the centre of these instructions)
Attach the base pole to the base and tighten the nut (1). Use a small crosshead screwdriver to remove the arresting
screw from the rim of the back protective grille (2). Attach the back protective grille to the motor cover (3) and
secure it with the nut (4).
2