Publicidad
Idiomas disponibles
Idiomas disponibles
Connections
Connecting the Wireless Microphone(s)
u
Changing the Wireless Microphone's Battery
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
Press the
Press the Wireless Mic's
to turn on the mic. The Mic indicator 1
or 2 will blink. It will be light solid when
connected.
NOTES:
• Working distance of up to 30 feet/10
meters in open space.
• If there is no audio input to the unit
for 20 minutes, the wireless mics
connection will automatically turn off.
Turn on the unit and press the
to reactivate the connection.
When the wireless mic batteries are low
the battery indicator will flash. Change the
batteries as follows:
1
Unscrew the bottom of the wire-
less microphone.
2
Replace the batteries with 2 x "AA"
size/LR6 battery.
3
Replace the bottom of the wire-
less microphone and screw it back
on.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer's
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
— E6 —
/
button to turn the unit on.
u button
button
Publicidad
