CONGA ROCKSTAR 9500 CONNECTED ERGOWET 3000 IA Manual De Instrucciones página 24

ENGLISH
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
- Fully charge the device before the first use.
- Remove the first-use tab installed in the filter.
- During the first 3 uses, it is recommended to charge the device for 12 hours between uses.
- The normal charge time is 6 hours approx. When the battery is fully charged, unplug it.
Box contents
- Conga Rockstar 3000 Advance ErgoWet Connected IA
- 2-in-1 narrow accessory for corners and furniture
- 2-in-1 wide accessory for corners and furniture
- Jaliscazo brush
- Motorised brush for upholstery
- Long brush
- Special brush for fabrics
- Union elbow
- Flexible vacuuming tube
- Extensible tube
- Watertank accessory
- Charging base
- Instruction manual
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
- To install the vacuuming brush head into the vacuuming tube, align both of them making
sure the tab on the brush head matches the guides on the tube, and introduce one into the
other until they are firmly fixed.
- To disassemble them, press the vacuuming-brush-head release button and pull from the
vacuuming tube while you hold the vacuuming brush head.
Warning
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
46
Vacuuming tube, vacuuming brush head, and main body assembly
To complete the vacuum cleaner's installation, once the vacuuming brush head is mounted on
the vacuuming tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 3
Introduce the battery in the slot located in the main body following the guides. Once it is
introduced, it will click into place. Once inserted, check that it is secured in position.
To disassemble the battery, press the release button and remove the battery.
Warning
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
4. OPERATION
You can use this vacuum cleaner in two different manners:
- Handheld vacuum cleaner, attaching the accessories directly to the main body.
- Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
Using the vacuum cleaner
- Press the power button to turn the vacuum cleaner on or off.
- Press the speed dial repeatedly to select the device's operating speed: LOW, MED, HIGH,
and AUTO. The device will turn on in LOW mode by default.
- If AUTO mode is selected, the vacuum cleaner will automatically adjust the suction power
based on dust concentration and surface type.
- The AI function can be activated when selecting AUTO mode: the upright vacuum cleaner
will automatically increase the suction power in the following circumstances:
A. When you stop the movement, e.g., in corners to clean them more thoroughly.
B. When you make three passes in a row.
C. When placing the vacuuming tube perpendicular to the floor.
- The AI-function icon will light up when activated.
- When the battery shows a percentage equal to or less than 20% while running at high
speed, the vacuum cleaner will start running at medium speed automatically to extend
the battery life.
- If too many particles or fibres are vacuumed, or if you touch the brush by accident during
operation, the rotary brush automatically stops spinning to prevent tangles and possible
damage.
ENGLISH
CONGA ROCKSTAR 9500 CONNECTED ERGOWET 3000 IA 47