Daitsu ACD 18U Manual De Funcionamiento página 95

06Manual 14Daitsu Eng 22/5/06
(1) ON / OFF TIMER button
Push the ON or OFF TIMER button as required.
The current timer setting is displayed along with ON/OFF TIMER indicator, and
the colon in the timer setting will flash.
(2) Time adjust button (TIME ADJUST)
Push to set the desired time.
Forward.
Backward.
Each time you push the button the time moves forward or backward by 10
minutes depending on which one you push. The time alters as quickly as you
push the button.
(3) Reserve button (OK)
Push this button. Check the TIMER lamp on the display panel of the indoor unit
is lit.
CANCELING
(4) Cancel button(CANCEL)
Push the CANCEL button to cancel the timer setting.
CHANGING
Preform steps 1, 2 and 3 to change the setting.
When you select the timer operation, the remote controller automatically
•
transmits the timer signal to the indoor unit at the specified time.
Therefore, keep the remote controller in a location from which it can trans-
mit the signal to the indoor unit properly.
• The effective operation time set by remote controller is limited in 24 hours.
18:20 Página 93
TIMER OPERATION
CAUTIONS
93