Descargar Imprimir esta página

Hydor MIXO Manual De Uso página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
the appliance. Cleaning and user maintenance
shall not be made by children without supervi-
sion.
IMPORTANT - Within the European Union, a crossed-out wheelie bin
symbol on the product, documentation or packaging indicates that the
product cannot be disposed of in the regular household waste stream, in
compliance with EU Directive 2012/19/EC and with current local regula-
tions. The product must be disposed of at recycling centres or authorised waste
disposal centres for electrical and electronic equipment, in accordance with current
legislation in the country where the product is found. Incorrect disposal of this type
of waste can have a negative impact on the environment and human health,
caused by the potentially hazardous substances produce by electrical and electron-
ic equipment. Correct disposal of these products will also contribute to the efficient
use of natural resources. Further information is available from the product retailer,
the competent local authorities and national manufacturer's organisations.
DIGITAL FEEDER is an automatic aquarium food feeder with electronic timer
control.
DESCRIPTION:
A. Cover
B. Feeding spout and control
C. Food compartment
D. Motor
E. Battery cover
TIMER SETTING
Attention: the Timer has to be reset every time the batteries are removed or re-
placed.
Remove cover (E) and insert two batteries taking care to place them with the cor-
rect polarity.
Press the SET key to start setting the actual time. The TIME symbol on the display
will flash during this operation (fig. 2).
Set hours and minutes by pressing the HR and MIN keys.
Press SET once again to memorize. The TIME symbol disappears and FEED one will
start flashing to indicate that you can enter the first feeding time setting.
Set the time by pressing HR and MIN and press SET to memorize and pass to the
second feeding time setting. The second FEED symbol will light up. Press HR and
MIN until you reach the time you wish for the second feeding and memorize by
pressing SET.
The display will now show the current feeding time and two FEED symbols indicat-
ing the DIGITAL FEEDER has been programmed for two feeding cycles a day (fig. 3).
English
7

Publicidad

loading

Este manual también es adecuado para:

M01100