Nordelettronica NE274 TVDL Instrucciones Para El Uso página 5

INDICATORS
BATTERIES CONNECTED
It indicates that the batteries are connected
and both of them are recharged by the
alternator. (Motor on)
230V MAINS ELECTRICITY SUPPLY
It indicates that the vehicle is connected to
the external mains electricity supply.
13-POLE PLUG
It indicates that the 13-pole plug is connected
to the vehicle. (Car battery connected)
CAR ICON:
It indicates that the system is powered by the
CAR battery. (Except during level check) If the
icon is flashing, it indicates an alarm condition.
CARAVAN ICON
It indicates that the system is powered by the
CARAVAN battery.(Except during level check)
If the icon is flashing, it indicates an alarm condition.
ALARM AND AUTO-SHUTDOWN FUNCTION MANAGEMENT:
CAR BATTERY:
The system generates an alarm when the car battery voltage drops below 11.8 V
During the first 30 seconds, the display shows the corresponding value, CAR ICON FLASHING.
CARAVAN BATTERY:
The system generates an alarm when the caravan battery voltage drops below 10.0 V
During the first 30 seconds, the display shows the corresponding value, CARAVAN ICON FLASHING.
AUTO-SHUTDOWN:
If the caravan battery voltage drops below 10V or if the car battery voltage drops below 11.8 V for more than 3 minutes,
the control panel turns off automatically.
TANK:
The system generates an alarm if the drinking water tank is empty.
During the first 30 seconds, the display shows the corresponding value, TANK ICON FLASHING.
LOW BATTERY ALARM ON / OFF:
To enable/disable the low battery alarm, hold
x 3sec
the BATTERY key for at least 3 seconds.
TANK EMPTY ALARM ON / OFF:
To enable/disable the tank empty alarm, hold
x 3sec
the TANK key for at least 3 seconds.
TOUCH AND ALARM SOUND ON / OFF:
To enable/disable the alarm sound signal or the touch sounds (when pressing the keys)
x 3sec
hold the TEMPERATURE key for at least 3 seconds.
NIGHT MODE:
To turn the night mode on, hold the POWER key for at least 3 seconds. Touch any key to exit.
x 3sec
No alarms will be displayed during this mode.
NE274-TVDL
DRINKING WATER TANK
Tank indicator. If the icon is flashing,
it indicates an alarm condition.
BLOWN FUSE
It indicates that there is a blown fuse
on the NE324 module.
FUSE INDICATOR
F4
It identifies the reference of the blown fuse.
From F1 to F5.
COMMUNICATION ERROR
E01
It indicates that there is a problem with the
communication between the system devices.
TEMPERATURE PROBE MISSING
It indicates that the external temperature probe
(JP3 connector, at the back of the panel) has not
been installed (OPTIONAL).
GB
5